A. Anti-slip pads
B. Adjusting screw
D. Connecting pin
E. Plastic clip
Align the base plate straight on the wall using the spirit level.
Place a total of 6 anti-slip pads in each corner and in the middle of a base plate.
Stack the long modules one after the other, reinforce each with anti-slip pads and fasten them from behind with the connecting clips.
The side box module for stabilization is later attached to the module with drill hole; it can be aligned to the left or right.
Place the second base plate in front of the first stack and level it with the spirit level.
Stack the front modules as shown in the picture. Place anti-slip pads between them and clip the modules from the front. The 1:2 module with the drilled hole must be placed in front of the rear module with the drilled hole.
Screw the side box module with the screws to the outer cubes from the inside.
Place the kitchen board on top, clip the faucet, and secure the mini kitchen with the rest of connecting clips when needed - and you're done!
By submitting, you agree to an anonymous publication of your pictures on our website and in our social networks.