The corner module has the same dimensions as a 2: 1 module and is therefore exactly twice as wide as a 1: 1 module. The cover is glued flush with the front edge and covers half of the module so that it can be stapled to other modules at a right angle.
Whether bookshelf, sideboard or chest of drawers. The module is used in every corner of the room or serves as a starting point for a room divider. The module and the rear wall are made of white coated MDF.
Note: The corner module is not available in the configurator.
- outer height
- outer width
- outer depth
- outer volume
- inner height
- inner width
- inner depth
- inner volume
Cubes can be hung by their long and short side using a rail system. Wall mounts are not suitable as anti-tipping devices when stacking shelves.
The maximum load depends on the module: half-depth cubes, which are ideal as, for example, bookshelves or CD racks, can be filled entirely with books or CDs/DVDs. Note: For full-depth shelf modules, we assume a maximum load of 12 kg for the 1:1 module and 5 kg for the 2:1 module.
A 5.5 cm hole to run cables through the back of the cube.
The hole is at the bottom left or right (please specify for modules with doors). The distance between the outer edge of the body and the centre of the hole is 6 cm. You can add your desired cable hole in the shopping trolley at bottom right, and select it for the respective cube.
Put your cubes in the limelight with our integrated lighting and accentuate the aesthetic – day and night! From now on you can get our 1:1 cube with built-in LED lighting on request.
Small lights are attached almost invisibly to the inside of the cube. LEDs are available in super warm white and can be dimmed through ten levels by remote control.
Power is supplied via a power pack, to which six illuminated cubes can be connected. The cable is laid through a tiny hole that we drill in the back wall of the relevant module, so that it's well hidden and invisible from the front. The modules are delivered fully assembled. All you have to do is plug it in and you're done!
Please note that, in addition to your cube with light, you need an LED kit with remote control to switch the light on and off. You can add the LED kit to your order in the shop.
› Here you will find instructions for commissioning your light cubes.
Record shelves according to your musical taste. Create the perfect stage for your favorite LPs.
Configure your individual cube shelf cube by cube. Caesar already suspected: This die will be cast!
Build shelves at home and on the go with our configurator
You can easily plan your modular shelving system yourself with the stocubo configurator. Please read our tips through to ensure that your shelf can be moved later and that there are no misunderstandings during planning.