This module is exactly half the height and twice the width of a 1:1 module. The drawers run on metal guide rails, which means the drawers glide smoothly. The drawers are also 'soft-close', meaning they close gently. This is available in white as well as with colored fronts. The material is white coated MDF, and the back panel is also white coated.
Should you choose to add drawers to the module, the drawers run on metal guide rails that allow the drawer to glide noticeably smoothly. Dampers allow the drawer to close gently ("soft-close"). For the fronts, you can choose between different colored options. If you choose the option with a drawer, the internal dimensions of the module will also be reduced accordingly.

The drawer has the following dimensions (cm):
Outside H 12.0 (front) | W 68.0 | D 30.5
Inside H 8.1 (back wall) | W 64.6 | D 28.0

Important note: Due to the long unsupported sides and the thickness of the material, the 1:2 modules, double width can deflect under heavier loads and should not be loaded with more than 7 kg in the middle. Therefore, they should ideally be positioned in the upper part of the shelf. If heavy objects are used on double-width modules (e.g. LP/DJ equipment), we recommend our cover plate or alternatively to use single width modules.
If the module is fitted with a drawer, it automatically receives an additional strut for stabilisation, which is why these modules are so resilient that they can also be installed in the lower shelving area.

Due to its own weight and load limit, this module is only suitable for wall suspension with low loads (max. 5 kg) and in combination with a drawer not suitable for wall suspension.