baby changing unit
Everything for babies – the stocubo cube changing unit! This unit consists of two 2:1 base plates, ensuring that it stands securely. There are also four 1:1, six 2:3, two 1:2 cubes and two changing drawer modules with five slots that offer sufficient storage space for diapers, baby clothes and other necessities. The baby changing panel is firmly anchored on the cubes at a height of 94 cm. The 20 cm high side edges ensure a particularly high level of fall protection for the baby. A side-hanging cube that can be installed individually for left- and right-handers is available as an additional storage compartment for diapers and care utensils. Below the changing panel there are two small drawers with pull-out stops for other items.
While the body is coated white, you can choose a combination of two tones in the stocubo colors of vanilla yellow, denim blue, cashmere grey and pistachio green for the slide-in modules. The changing mat and cubes are made of 12 mm-thick MDF with a total height of 109 cm, width of 73.6 cm and depth of 80 cm. All modules are firmly clamped from the front and are additionally stabilized by the fold of the changing panel.
If the changing panel is no longer needed, a children's sideboard or children's shelf can be built from the changing unit in no time at all. You can integrate the two 1:2 Cubes with clips milling in our youth and children's desk – freely according to the motto: build up, rebuild, build differently.
- outer height
- outer width
- outer depth
- outer volume
- inner height
- inner width
- inner depth
- inner volume
Cubes can be hung by their long and short side using a rail system. Wall mounts are not suitable as anti-tipping devices when stacking shelves.
The maximum load depends on the module: half-depth cubes, which are ideal as, for example, bookshelves or CD racks, can be filled entirely with books or CDs/DVDs. Note: For full-depth shelf modules, we assume a maximum load of 12 kg for the 1:1 module and 5 kg for the 2:1 module.
A 5.5 cm hole to run cables through the back of the cube.
The hole is at the bottom left or right (please specify for modules with doors). The distance between the outer edge of the body and the centre of the hole is 6 cm. You can add your desired cable hole in the shopping trolley at bottom right, and select it for the respective cube.
Put your cubes in the limelight with our integrated lighting and accentuate the aesthetic – day and night! From now on you can get our 1:1 cube with built-in LED lighting on request.
Small lights are attached almost invisibly to the inside of the cube. LEDs are available in super warm white and can be dimmed through ten levels by remote control.
Power is supplied via a power pack, to which six illuminated cubes can be connected. The cable is laid through a tiny hole that we drill in the back wall of the relevant module, so that it's well hidden and invisible from the front. The modules are delivered fully assembled. All you have to do is plug it in and you're done!
Please note that, in addition to your cube with light, you need an LED kit with remote control to switch the light on and off. You can add the LED kit to your order in the shop.
› Here you will find instructions for commissioning your light cubes.
Vinyl shelves ›
Record shelves according to your musical taste. Create the perfect stage for your favorite LPs.
Cube shelves ›
Configure your individual cube shelf cube by cube. Caesar already suspected: This die will be cast!
Office shelves ›
Individual office shelves for every form of organization. Do good business with modular shelving.
Build shelves at home and on the go with our configurator
You can easily plan your modular shelving system yourself with the stocubo configurator. Please read our tips through to ensure that your shelf can be moved later and that there are no misunderstandings during planning.